.          :A7?    El soporte para UltraPen Eraser viene incorporado.  En el momento en el que se apoye en 
    la tableta el cabezal de borrado del UltraPen, SmartSketch cambiar automticamente 
    a la herramienta de borrado.

  Adobe Photoshop 3.0.4
    El soporte para el borrador en Windows 3.1 tendr lugar en futuras ediciones de 
    Adobe Photoshop.

  Ron Scott QFX 5.1
    El soporte para UltraPen Eraser viene incorporado.  En el momento en el que se apoye en 
    la tableta el cabezal de borrado del UltraPen, QFX deshar la ltima pincelada, 
    o bien borrar de acuerdo a la presin.

  Corel Draw / PhotoPaint 6
    El soporte para UltraPen Eraser vendr incorporado a partir de la revisin 6.00.118.


                    **************************************
                        INFORMACION SOBRE APLICACIONES
                    **************************************

  AutoCad Edicin 13
    Tan slo las ediciones 13c2a y posteriores operan con digitalizadores compatibles con Wintab. 
    WACOM recomienda utilizar la Edicin 13c3 o posterior.
    Utilice los "parches" para AutoCAD13 para corregir este error (disponibles en AutoDesk). 

  MicroStation 5 / 95
    Algunas de las funciones asignadas al botn del cursor en MicroStation requieren unos ajustes 
    del botn especiales en el Panel de control de WACOM. WACOM recomienda empezar con los ajustes 
    POR DEFECTO de MicroStation para las funciones asignadas al botn. Dependiendo de las unciones
    requeridas, podra resultar necesario cambiar los ajustes del botn en el Panel de control de 
    WACOM antes de introducir nuevas funciones dentro de MicroStation. Si hubiera algn problema 
    con la particin de la tableta en MicroStation, vaya al Panel de control de WACOM y redefina 
    las funciones asignadas al botn del cursor.


                    *************************************************
                              NOTICIAS DE ULTIMA HORA SOBRE
                           EL CONTROLADOR DE WACOM PARA WINDOWS
                    *************************************************

Las funciones del Panel de control de WACOM que siguen no se encuentran disponibles en la actualidad, estarn disponibles en futuras entregas del controlador. Este controlador se puede 
obtener en los servicios WACOM BBS, Internet, America Online y CompuServe.

--- WINDOWS 3.1 ---

    Apto para el contexto:    Facilita soporte para el borrador en aquellos programas que no 
                              reconocen el mismo.
    Orientacin:              Le permite cambiar la orientacin de la tableta.
    Botones ABS, REL:         Estos botones de la barra de mens permanecern inactivos hasta una 
                              prxima entrega del controlador de WACOM. La tableta puede 
                              conmutarse al modo relativo, cambiando el aspecto al modo 
                              relativo en la ventana Ajuste de escala del panel de control de 
                              WACOM.
    Cargar / Guardar:         Le permite cargar y guardar determinados ajustes del controlador.


                    ******************************
                          ERRORES CONOCIDOS
                    ******************************

--- WINDOWS 3.1 ---

1)  Si emplea el controlador del altavoz del ordenador, asegrese de que los interruptores estn 
    activados. Si estn desactivados, la tableta puede bloquearse.  Se puede acceder al Panel de 
    Control del Altavoz del Oare currently active.

2)  NT 3.51 only:
    If the cursor can be moved during log-in but not after the program manager has
    been started, check the following:
    1)Start the NT Control Panel.
    2)Start Service control.
    3)Bring up the properties of Wintab32.
    4)Put a check in the box that refers to the "desktop".
    5)Restart NT.

3)  If the cursor disappeared from the screen after replacing the mouse with a Wacom tablet,
    the cursor module of NT has to be activated again:
    1)Start the NT Control Panel
    2)Start Device control
    3)Activate for MOUCLASS the Startup property SYSTEM.
    4)Restart NT.


                    ******************************
                       ERASER-AWARE APPLICATIONS
                    ******************************

ArtPad II and UltraPad are fully compatible with all Windows applications,
including your favorite business applications such as Microsoft Word, Excel, 
and PowerPoint.  Or, use one of the many graphics applications (such as those 
shown below) that are eraser-aware:

  Fractal Design Dabbler 2.0
    Support for the Erasing UltraPen is built-in. When the eraser end of the UltraPen is placed
    on the tablet, Dabbler will automatically switch to the eraser tool.

  Fractal Design Painter 4
    Fractal Design Painter 4 has built-in support for the eraser. It allows you to freely assign 
    the eraser to any tool in the tool palette. In the tool-selection menu, simply use the eraser 
    to select the tool you want to assign to the eraser, and use the tip to select the tool you 
    want to assign to the pen tip. Painter will remember your selection for each end of the 
    pen, and turning the pen around will switch from one tool to the other. 

  FutureWave SmartSketch 1.0R2 & 95
    Support for the Erasing UltraPen is built-in. When the eraser end of the UltraPen is placed 
    on the tablet, SmartSketch will automatically switch to the eraser tool.

  Adobe Photoshop 3.0.4
    Support for the Erasing UltraPen is built-in under Windows NT. When the eraser end of 
    UltraPen is placed on the tablet, Photoshop will automatically switch to the eraser tool.

  Ron Scott QFX 5.1
    Support for the Erasing UltraPen is built-in. When the eraser end of the UltraPen is placed   
    on the tablet, QFX will either undo the last paint stroke or erase with pressure.

  Corel Draw / PhotoPaint 6
    Support for the Erasing UltraPen will be built-in starting at revision 6.00.118.


                    ******************************
                       APPLICATION INFORMATION
                    ******************************

  AutoCad Release 13
    Only releases 13c2a and higher work with Wintab compatible digitizers. 
    WACOM recommends to use Release 13c3 or higher.
    Apply AutoCAD13patches to fix this bug (available from AutoDesk). 

  MicroStation 5 / 95
    Some cursor button assignments inside MicroStation require special button
    settings of the WACOM Control Panel. WACOM recommends to start with 
    DEFAULT settings of MicroStation button assignments. Depending on the required
    button assignments, it may be necessary to change the button settings in the
    Wacom Control Panel before the new assignments inside MicroStation.
    If there are any problems in partitioning the tablet inside MicroStation, 
    enter the Wacom Control Panel and re-define the puck button assignments.


                    ******************************
                     LATE BREAKING NEWS ABOUT THE
                       WACOM DRIVER FOR WINDOWS
                    ******************************

The following features in the WACOM Control Panel are not currently functional, 
they will be available in future releases of the driver. This driver can be 
downloaded from the WACOM BBS, Internet, America Online and CompuServe.

--- WINDOWS NT ---

    Context Aware:      Provides eraser support for non-eraser aware programs.
    Menu Strip:         Brings up the Menu Strip Setup Window.
    Orientation:        Allows you to change the orientation of the tablet.
    Pointers:           Brings up the Pointers Setup Window.
    Portion of Tablet / 
      Set Tablet:       Allows you to define the active tablet area with the pen
                        or the puck.
    Load / Save:        Allows to load and save specific driver settings


                    ******************************
                              KNOWN BUGS
                    ******************************

--- WINDOWS NT ---

1) During the startup of Windows NT several error messages are recorded in the Event Log. These messages have the keywords Serial or Wacom and do not affect the correct behaviour of Windows NT or the Wacom driver.


                    ******************************
                       MODIFICATIONS TO WINDOWS
                                REGISTRY
                    ******************************

--- WINDOWS NT SETUP MODIFICATIONS ---

The following files are expanded from the WIN subdirectory on the WACOM
software diskette to the WINDOWS subdirectory on your hard drive:

ARTPADII.HL_ ->  ARTPADII.HLP  (ArtPad II Help file)
ARTZII.HL_   ->  ARTZII.HLP    (UltraPad Help file)

The following files are expanded from the WIN\NT subdirectory 
to the WINDOWS\SYSTEM32 subdirectory:

WACOM .CP_   ->  WACOM .CPL    (Control panel)
WACOM .DR_   ->  WACOM .DRV    (Main Installable driver)
WINTAB.DL_   ->  WINTAB.DLL    (16 bit Pressure library)
WINTAB32.DL_ ->  WINTAB32.DLL  (Pressure library)
WINTAB32.EX_ ->  WINTAB32.EXE  (Pressure service)
WACOMKEY.EX_ ->  WACOMKEY.EXE  (Keystroke service)

And these files go to the WINDOWS\SYSTEM32\DRIVERS subdirectory:

WACOM.SY_    ->  WACOM.SYS      (Serial tablet driver)
PENCLASS.SY_ ->  PENCLASS.SYS   (intermediate driver)
WTCLASS.SY_  ->  WTCLASS.SYS    (intermediate driver)


Setup adds all the registry entries under
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Wacom
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Penclass
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\wtclass
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Wintab32
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\wacomkey

Setup also add entries under 
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog
so that WACOM drivers can log system events.

Setup also adds
"pen" REG_SZ "wacom.drv"
to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32

And setup adds "Pen Class" to the current entries in
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\ServiceGroupOrder


                    ******************************
                      OBTAINING SOFTWARE UPDATES
                    ******************************

Software updates are available for download from the following services:

America Online:  Choose the GoTo menu, choose Keywords, and type WACOM.

CompuServe:      Type GO WACOM at any"!" prompt.

Internet:        Anonymous FTP: ftp.wacom.com/pub/drivers/ibmpc.
                 Worldwide Web: http://www.wacom.com/drivers.html.

WACOM BBS Germany:    xx49 - (0)2131 -  120 317     (Modem settings 1200-14.4 Kbaud,8,N,1) 


WACOM and UltraPad are registered trademarks and ArtPad and UltraPen are 
trademarks of WACOM Co. Ltd. All other brand and product names are 
trademarks or registered trademarks of their respective holders.

